About

Product information

TMC HFE-347E is a 3M™ Novec™ 7100 Equivalent offering similar chemistry and physical properties.

TMC HFE-347E Fluoro-Solvent is an engineered fluorinated fluid designed as an economical equivalent to Novec® 7100, Chemours Vertrel®, and other hydro-fluoro-ether fluids. It is ideal for two-phase immersion cooling, and precision cleaning of metals, alloys, composites, and plastics. Also a quick-drying agent and particle remover. 

Chemical Name: 1,1,2,2-Tetrafluoroethyl 2,2,2-Trifluoroethyl Ether

CAS Number: 406-78-0

EU RoHS Directive (EU) 2015/863 amending Annex II to Directive 2011/65EU

Features

  • Zero Ozone Depletion Potential (ODP)
  • Low Global Warming Potential (GWP) 580
  • US EPA SNAP approved
  • No SARA Title III Reporting
  • Nonflammable
  • Non-corrosive
  • Excellent thermal, chemical, and hydrolytic stability
  • Reclaimable by TMC Industries Inc.
  • Low surface tension penetrates tight spaces for improved cleaning
  • Can be used with ultrasonic cleaners.
  • VOC Exempt
  • Certified to < 2ppm NVR

Applications

  • Heat Transfer
  • Two-Phase Immersion Cooling Fluid
  • Heavy-duty cleaning (co-solvent) – heavy oils, greases, fluxes
  • Medium-duty cleaning (azeotrope)– oils, greases, waxes
  • Light-duty cleaning (neat)– particulates, fluoro-lubricants, light oils, fluoropolymers
  • Lubricant carrier: fluorocarbons, hydrocarbons, and silicones
  • CFC, HCFC, HFC, and PFC replacement

TMC HFE-347 is non-corrosive and non-staining to a wide variety of substrates. Some selected categories of materials compatible with TMC HFE-347"

Most polymers and elastomers typically encountered during cleaning and vapor degreasing of precision parts, electronics, etc. • Copper, Stainless Steel, Aluminum, Titanium and other metals commonly used in precision parts manufacturing • Polyethylene • Polyvinylchloride (PVC, CPVC) •Polyester (PET, BET) • Polyimide (PI, PEI, PAI) • Polyetherketone (PEK) • Polyaryletherketone (PEEK) •Polyarylsulfone (PAS) • Polyphenylene Sulfide (PPS) • Polypropylene • Acetal • Epoxy • PTFE, Teflon •Polysulfone (PSO) • Phenolic • Ionomer • EPDM

 

Physical Properties

TMC HFE-347

3M® Novec® 7100

Molecular Weight

200

250

Boiling Point (@ 760 mm Hg)

56° C

61° C

Pour Point

-91° C

-135° C

Density (@ 25° C)

1.47 g/ml

1.52 g/ml

Surface Tension

16.4 dyne / cm

13.6 dyne / cm

Viscosity (@ 25 °C)

0.65 

0

Dielectric Breakdown Voltage (kV)

39.5

>25 

Kinematic Viscosity (@ 25 °C)

.044

0.38 

Specific Heat Capacity

1260

1138

Thermal Conductivity

89 

 

Melting Point

-93° C

 

Flash Point

None

None


Product information

TMC HFE-347E is a 3M™ Novec™ 7100 Equivalent offering similar chemistry and physical properties.

TMC HFE-347E Fluoro-Solvent is an engineered fluorinated fluid designed as an economical equivalent to Novec® 7100, Chemours Vertrel®, and other hydro-fluoro-ether fluids. It is ideal for two-phase immersion cooling, and precision cleaning of metals, alloys, composites, and plastics. Also a quick-drying agent and particle remover. 

Chemical Name: 1,1,2,2-Tetrafluoroethyl 2,2,2-Trifluoroethyl Ether

CAS Number: 406-78-0

EU RoHS Directive (EU) 2015/863 amending Annex II to Directive 2011/65EU

Features

  • Zero Ozone Depletion Potential (ODP)
  • Low Global Warming Potential (GWP) 580
  • US EPA SNAP approved
  • No SARA Title III Reporting
  • Nonflammable
  • Non-corrosive
  • Excellent thermal, chemical, and hydrolytic stability
  • Reclaimable by TMC Industries Inc.
  • Low surface tension penetrates tight spaces for improved cleaning
  • Can be used with ultrasonic cleaners.
  • VOC Exempt
  • Certified to < 2ppm NVR

Applications

  • Heat Transfer
  • Two-Phase Immersion Cooling Fluid
  • Heavy-duty cleaning (co-solvent) – heavy oils, greases, fluxes
  • Medium-duty cleaning (azeotrope)– oils, greases, waxes
  • Light-duty cleaning (neat)– particulates, fluoro-lubricants, light oils, fluoropolymers
  • Lubricant carrier: fluorocarbons, hydrocarbons, and silicones
  • CFC, HCFC, HFC, and PFC replacement

TMC HFE-347 is non-corrosive and non-staining to a wide variety of substrates. Some selected categories of materials compatible with TMC HFE-347"

Most polymers and elastomers typically encountered during cleaning and vapor degreasing of precision parts, electronics, etc. • Copper, Stainless Steel, Aluminum, Titanium and other metals commonly used in precision parts manufacturing • Polyethylene • Polyvinylchloride (PVC, CPVC) •Polyester (PET, BET) • Polyimide (PI, PEI, PAI) • Polyetherketone (PEK) • Polyaryletherketone (PEEK) •Polyarylsulfone (PAS) • Polyphenylene Sulfide (PPS) • Polypropylene • Acetal • Epoxy • PTFE, Teflon •Polysulfone (PSO) • Phenolic • Ionomer • EPDM

 

Physical Properties

TMC HFE-347

3M® Novec® 7100

Molecular Weight

200

250

Boiling Point (@ 760 mm Hg)

56° C

61° C

Pour Point

-91° C

-135° C

Density (@ 25° C)

1.47 g/ml

1.52 g/ml

Surface Tension

16.4 dyne / cm

13.6 dyne / cm

Viscosity (@ 25 °C)

0.65 

0

Dielectric Breakdown Voltage (kV)

39.5

>25 

Kinematic Viscosity (@ 25 °C)

.044

0.38 

Specific Heat Capacity

1260

1138

Thermal Conductivity

89 

 

Melting Point

-93° C

 

Flash Point

None

None


TMC™ by TMC™

TMC HFE-347E

Translation missing: en.products.product.sku:2502E-12

3M™ Novec™ 7100 Equivalent. **Passed 3rd Party Laboratory Testing: Non Detectable PFAS**
3M™ Novec™ 7100 Equivalent. **Passed 3rd Party Laboratory Testing: Non Detectable PFAS**
Regular price
$228.79
Sale price
$228.79
Regular price
Size:
View Technical DatasheetView Safety Datasheet
Shipping
Consider any shipping or transit time offered to you by the carrier as an estimate.
Returns
Return most new, unopened items within 30 days of delivery for a refund minus restocking fee.

TMC Industries can reclaim your used fluids/solvents/oils, restoring them to like new condition. Our reclamation process typically achieves 99% purity.

Contact us for more details.

Related Products