TMC-7100 is designed to replace ozone-depleting substances in many applications. This CFC replacement fluid has one of the best toxicological profiles with a 750 ppm (eight-hour average) time-weighted average exposure guideline.
The chemical and thermal stability, along with a high boiling point and low surface tension, make it ideal for use in vapor degreasing, along with many other industrial and specialty solvent applications.
• REPLACEMENT TO 3M® NOVEC® 7100
• MISCIBLE WITH NOVEC® 7100
• ZERO OZONE DEPLETION POTENTIAL (ODP)
• LOW GWP
• HIGH BOILING POINT
• LOW SURFACE TENSION
• NO FLASH POINT
Electronic Cleaner, Specialty Solvent, Heat Transfer Fluid, Dielectric Test Media, Lubricant Carrier Solvent, Spray Contact Cleaner, CFC, HCFC, HFC and PFC Replacement, Spot-Free Water Drying Agent, Medium-Duty Cleaning Azeotrope- Oils, Greases and Waxes, Light-Duty Cleaning Particulates, Fluorolubes, Light Oils, Fluoropolymers, Heavy-Duty Cleaning (Co-Solvent) Heavy Oils, Greases and Fluxes.
TMC-7100 fluid is compatible with most metals and hard polymers. Soft and elastomeric materials should be limited to compounds that contain the least amount of extractable plasticizer. As with most fluorinated fluids, TMC-7100 fluid will absorb into fluorinated plastics and elastomers over longer exposures.
Vapor Pressure and Density
The variation of vapor pressure and density with temperature for TMC-7100 can be calculated using the following formulas:
Vapor Pressure: In P = 22.415 - 3641.9 [1/(t+273)]
Density: D = 1.5383 - 0.002269t
P = Vapor Pressure in Pascals
t = Temperature in °C
D = Density in g/ml
Recycle and Reclamation
Why pay for expensive disposal services, when TMC Industries can reclaim your used fluorinated fluids, restoring them to like-new condition, and saving you up to 50% in replacement fluids? TMC Industries also buys and resells used fluorinated fluids. Contact us for more details.