About
The low surface tension and low viscosity of TMC-7200 fluid make it ideal for use in vapor degreasing, and cold cleaning applications. In addition, its chemical and thermal stability, non flammability, and low toxicity make it useful for other industrial applications such as specialty solvent and heat transfer applications. TMC-7200 fluid has a higher boiling point than most CFCs, HCFCs, and HFCs, reducing evaporative losses.
APPLICATIONS
- CFC, HCFC, HFC, and PFC replacement agent
- Lubricant carrier, Fluorocarbons, Hydrocarbons and Silicones
- Cold cleaner (flex circuits, wipe solvent)
- Cleaning and rinsing agent for vapor-degreasing
- Specialty solvents, dispersion medium, reaction medium, extraction solvent
- Heat Transfer Fluid
- Light-duty cleaning (neat)–particulates, fluorolubes, light oils, fluoropolymers
PHYSICAL PROPERTIES
| Form: | Liquid |
| Color: | Colorless |
| Odor: | Faint |
| Molecular Weight: | 264 |
| pH: | Not Applicable |
| Liquid Density: | 1.43 g/cm³ (25 °C) |
| Kinematic Viscosity: | 0.6 cPs |
| Boiling Point: | -138°C |
| Melting Point: | 76°C |
| Pour Point: | -138℃ |
| Evaporation Rate: | -138°C |
| Flash Point: | None |
| Flammability: | Not Applicable |
| Dielectric Strength: | >40 kV |
| Dielectric Constant: | 7.3 @1kHz |
| Vapor Pressure: | 16 kPa (25 °C) |
| Latent Heat of Vaporization: | 119 |
| Surface Tension: | 13.6 mN/m |
| Water Solubility: | 92 ppm |
| Solubility in Water: | < 20 ppm |
| Ozone Depletion Potential (ODP): | 0 |
| Global Warming Potential (GWP): | 59 |
PERFORMANCE
| PROPERTY | METHOD | RESULT |
| Thermal Conductivity (@ 25°C) | ASTM D 2717 | 0.075 W/m.K |
| Kinematic Viscosity (@ 25°C) | ASTM D 445.a | 0.47 cSt |
| Kinematic Viscosity (@ -20°C) | ASTM D 445.a | 0.81 cSt |
| Kinematic Viscosity (@ 0°C) | ASTM D 445.a | 0.63 cSt |
| Relative Density (@ 25°C) | ASTM D 4052 | 1.4243 g/cm3 |
| Vapor Pressure (@100°F) | ASTM D 2879 | 3.424 psia |
| Dynamic Viscosity (@ 40°C) | ASTM D 7042 | 0.561 cP |
| Dynamic Viscosity (@ 100°C) | ASTM D 7042 | 0.338 cP |
| Residue by Evaporation | In-House | <10 μg/mL |
| Pour Point | ASTM D 97 | <-100°F |
MATERIAL COMPATIBILITY
TMC-7200 fluid is compatible with most metals and hard polymers. Soft and elastomeric materials should be limited to compounds that contain the least amount of extractable plasticizer.
COMPLIANCE
- Entry 68 of Regulation (EU) 2021/1297 amending Annex XVII of REACH Regulation (EC) No 1907/2006
DISPOSAL AND RECYCLING
This fluid can be recycled and reused. Why pay for expensive disposal services, when TMC Industries can reclaim your used fluorinated fluids, restoring them to like-new condition, and saving you up to 50% in replacement fluids? TMC Industries also buys and resells used fluorinated fluids. Contact us for more details.
DOCUMENTS
| 3rd Party Lab Results: Non Detectable PFAS | Report Download |
The low surface tension and low viscosity of TMC-7200 fluid make it ideal for use in vapor degreasing, and cold cleaning applications. In addition, its chemical and thermal stability, non flammability, and low toxicity make it useful for other industrial applications such as specialty solvent and heat transfer applications. TMC-7200 fluid has a higher boiling point than most CFCs, HCFCs, and HFCs, reducing evaporative losses.
APPLICATIONS
- CFC, HCFC, HFC, and PFC replacement agent
- Lubricant carrier, Fluorocarbons, Hydrocarbons and Silicones
- Cold cleaner (flex circuits, wipe solvent)
- Cleaning and rinsing agent for vapor-degreasing
- Specialty solvents, dispersion medium, reaction medium, extraction solvent
- Heat Transfer Fluid
- Light-duty cleaning (neat)–particulates, fluorolubes, light oils, fluoropolymers
PHYSICAL PROPERTIES
| Form: | Liquid |
| Color: | Colorless |
| Odor: | Faint |
| Molecular Weight: | 264 |
| pH: | Not Applicable |
| Liquid Density: | 1.43 g/cm³ (25 °C) |
| Kinematic Viscosity: | 0.6 cPs |
| Boiling Point: | -138°C |
| Melting Point: | 76°C |
| Pour Point: | -138℃ |
| Evaporation Rate: | -138°C |
| Flash Point: | None |
| Flammability: | Not Applicable |
| Dielectric Strength: | >40 kV |
| Dielectric Constant: | 7.3 @1kHz |
| Vapor Pressure: | 16 kPa (25 °C) |
| Latent Heat of Vaporization: | 119 |
| Surface Tension: | 13.6 mN/m |
| Water Solubility: | 92 ppm |
| Solubility in Water: | < 20 ppm |
| Ozone Depletion Potential (ODP): | 0 |
| Global Warming Potential (GWP): | 59 |
PERFORMANCE
| PROPERTY | METHOD | RESULT |
| Thermal Conductivity (@ 25°C) | ASTM D 2717 | 0.075 W/m.K |
| Kinematic Viscosity (@ 25°C) | ASTM D 445.a | 0.47 cSt |
| Kinematic Viscosity (@ -20°C) | ASTM D 445.a | 0.81 cSt |
| Kinematic Viscosity (@ 0°C) | ASTM D 445.a | 0.63 cSt |
| Relative Density (@ 25°C) | ASTM D 4052 | 1.4243 g/cm3 |
| Vapor Pressure (@100°F) | ASTM D 2879 | 3.424 psia |
| Dynamic Viscosity (@ 40°C) | ASTM D 7042 | 0.561 cP |
| Dynamic Viscosity (@ 100°C) | ASTM D 7042 | 0.338 cP |
| Residue by Evaporation | In-House | <10 μg/mL |
| Pour Point | ASTM D 97 | <-100°F |
MATERIAL COMPATIBILITY
TMC-7200 fluid is compatible with most metals and hard polymers. Soft and elastomeric materials should be limited to compounds that contain the least amount of extractable plasticizer.
COMPLIANCE
- Entry 68 of Regulation (EU) 2021/1297 amending Annex XVII of REACH Regulation (EC) No 1907/2006
DISPOSAL AND RECYCLING
This fluid can be recycled and reused. Why pay for expensive disposal services, when TMC Industries can reclaim your used fluorinated fluids, restoring them to like-new condition, and saving you up to 50% in replacement fluids? TMC Industries also buys and resells used fluorinated fluids. Contact us for more details.
DOCUMENTS
| 3rd Party Lab Results: Non Detectable PFAS | Report Download |
TMC-7200
Translation missing: en.products.product.sku:7200-12
- Regular price
- $484.56
- Sale price
- $484.56
- Regular price
-
Shipping Policy
Shipping Policy
Return Policy
Return Policy
