TMC-367E (NO HFC’s – LOW VOC) – TMC Industries, Inc.

Zoom the image with the mouse

TMC-367E (NO HFC’s – LOW VOC)

Out of stock
Precision Cleaning Solvent
2504E-50
$196.70
* Size

$196.70
  customers are viewing this product

TMC-367E is for INDUSTRIAL USE only. It is not designed for consumer use. TMC-367E is a precision cleaning solvent mixture of 1,2-trans-dichloroethylene and proprietary fluorinated compounds. It was designed with no HFCs, for cleaning applications as a direct substitute for solvents like nPB, Chemours Vertrel®, 3M Novec®, HCFC-225, and others.

  • LOW VOC CONTENT
  • LOW VISCOSITY
  • ZERO SURFACE RESIDUE
  • NON-FLAMMABLE
  • NO FLASH POINT 

Applications

TMC-367E is specifically blended to have lower VOC content, this solvent blend is perfectly suited for general cleaning and is our recommended solvent for medical applications. Its solvency for hydrocarbon soils is superior to most similar high-trans fluorinated solvent blends. It can reliably replace other cleaning solvents such as n-propyl bromide (nPB) and trichloroethylene (TCE). TMC-367E has a broad spectrum cleaning capability for many types of contaminants including cutting oils, heavy greases, stamping oils, gear oils, hydraulic oils, vacuum oils, mineral oils, waxes, and refrigerant oils.    

    Applications

    This solvent blend is perfectly suited for vapor degreasing in modern equipment, refrigerant flush applications, and many others. Its solvency for hydrocarbon soils and fluxes is excellent. It can reliably replace cleaning solvents such as n-propyl bromide (nPB), trichloroethylene (TCE), Vertrel™, Novec™, HCFC-225, and others in many applications. It can also be used as a carrier fluid for the deposition of materials such as silicone and other oils.

    Physical and Chemical Properties

    TMC-367E

    Appearance

    Clear and Bright

    Boiling Point

    39°C

    KB Value

    63

    Specific Gravity

    1.362 g/ml @ 25°C

    Viscosity

    0.41CP @ 20°C*

    Heat Capacity

    0.270cal/g @ 20°C*

    Vapor Pressure

    368 mmHg @ 20°C*

    Vapor Flammability in Air

    Lower Limit – 6.7%*

    Upper Limit – 19%*

    VOC Content

    587 g/L

    4.89lb/gal

    GWP

    330

    ODP

    Zero Ozone Depletion Potential

    *Based of 1,2 Trans dichloroethylene

    Contaminants Removed

    • Adhesives
    • Buffing Compounds
    • Refrigerant Oils
    • Greases
    • Hydraulic Oils
    • Silicone Oils
    • Waxes/Pitch
    • Drawing Oils
    • And Many Others….

    Materials Compatibility

    TMC-367E is compatible with most polymers and elastomers typically encountered during cleaning and vapor degreasing of precision parts, electronics, etc. The solvent is also compatible with stainless steel, aluminum, iron, and every other metal commonly used in precision parts manufacturing. A complete reference chart showing plastics and elastomers compatibility is available on page 2 of the TDS. In the laboratory bench test of widely used plastics and elastomers, there were very few incompatibilities found after immersion in coiling vapors for up to 15 minutes.

     

    Material Compatibility

        

          Polyethylene                                  Polypropylene

          Polyvinylchloride (PVC, CPVC)                   Acetal

          Polyester (PET, BET)                                    Epoxy

          Polyimide (PI, PEI, PAI)                      PTFE, Teflon

          Polyetherketone (PEK)             Polysulfone (PSO)

          Polyaryletherketone (PEEK)                    Phenolic

          Polyarylsulfone (PAS)                              Ionomer

          Polyphenylene Sulfide (PPS)                      EPDM

    Incompatible Materials

         

          Polystyrene                                   Epichlorohydrin

          Polyphenylene Oxide (PPO)                      Silicone

          Polycarbonate                                Natural Rubber

          ABS                                                               Acrylic

    Environmental Properties

    TMC-367E ingredients are listed as acceptable by the U.S. EPA under the SNAP program as a substitute for ozone-depleting substances and are not subject to SARA Title III (EPCRA) reporting regulation. It is not considered a Hazardous Air Pollutant (HAP) and therefore is not regulated under NESHAP.

    Spent TMC-367E is not considered hazardous waste in the US as long as a hazardous material is not deposited into the solvent during the cleaning process.

    Flammability

    TMC-367E exhibits no flash point on either Pensky-Martens Closed Cup (ASTM D93) or Tag Closed Cup (ASTM D56) methods and is not classified as flammable by OSHA or DOT. However, as is true with almost all halogenated solvents, it does have flammable limits in air in the presence of a high ignition energy source (e.g., a welding torch). TMC-367E is not classified as flammable or hazardous for transport by DOT.

    Storage and Handling

    TMC-367E is thermally stable and will not oxidize or degrade during storage under normal conditions. It is recommended to store the product inside a clean, dry area and out of direct sunlight or other heat sources. Do not freeze or store below 32°F (0°C) nor above 90°F (32°C) to prevent leakage or potential rupture of container due to contraction/expansion and pressure changes. Drum pumps are recommended to dispense the solvent from its container. Refer to the Safety Data Sheet for more information or contact TMC Industries, Inc. for further assistance.

     

    Shipping Policy

    We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

    Shipping Time -- Most orders received before 3:00PM Central Time will ship the same day, provided the product ordered is in stock. Most orders received after 3:00 PM will ship the next business day. Orders are not processed or shipped on Saturday, Sunday or major US holidays.

    We cannot guarantee when an order will arrive. Consider any shipping or transit time offered to you by the carrier as an estimate. We encourage you to order in a timely fashion to avoid delays caused by shipping or product availability.

    Returns Policy

    You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

    You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

    If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

    Technical Datasheet
    For Safety Datasheet (SDS), please contact us!
    You have successfully subscribed!
    This email has been registered