Zoom the image with the mouse

SuperCORR-A Lubricant

In stock
31911
$75.00
* Size

$75.00
  customers are viewing this product

Combined Lubricant and Corrosion Prevention Compound 

MIL-DTL-87177B (revised MIL-L-87177A) Type I, Grade B 

A proprietary formulation containing extremely long-lasting anti corrosion inhibitors, which also give superior lubrication coefficients and protect components against moisture. This unique, water displacing lubricant, with synthetic corrosion prevention compounds is tested and proven non-flammable and environmentally friendly without sulphates, chlorides, or other halogens. 

Unexcelled in preventing corrosion and contamination on all surfaces in mechanical close tolerance slow moving components, electrical and electronic equipment, used in humid conditions or exposed to salt water. 

Can be used on any metal surfaces to prevent galvanic and fretting corrosion as well as other types of corrosion including uniform, pitting and microbial corrosion. Forms a super thin, hydrophobic, non-flammable lubricant film with anti-corrosion properties approximately 7 microns (0.00028 inch) in thickness and is compliant with U.S. EPA regulations, the European Union RoHS Directives and meets MIL-DTL-87177B (Revised MIL-L-87177A) specifications. 

Product Overview 

SuperCORR A has the following unique combination of properties: 

  • Displaces both fresh and saltwater moisture
  • Non-toxic, Non-flammable and Non-hazardous
  • Has a decomposition temperature of 550°F
  • Will not freeze or harden, retains properties even in high altitude applications
  • Is extremely resistant to air-drying
  • Self-healing
  • Does not attract contaminants
  • Is inert and will not increase or decrease contact resistance
  • Eliminates surface static electricity, Corona and other electro migration problems in electronic circuit boards and connectors
  • Protects against wear, moisture, general and fretting corrosion
  • Non-reactive to most plastics
  • Forms an airtight seal preventing damage to electronics and other surfaces caused by exposure to acid gases such as Sulfur dioxide (SO2), Nitrogen dioxide (NO2), Hydrogen Sulfide (H2S), Ammonia (NH3), Chlorine based gases (CL12), and the thermal decomposition by product of HFC-227ea used in fire suppression systems, Hydrogen Fluoride (HF) 

NOTE: SuperCORR A is to be applied as a preventative measure and will not remove corrosion from an already corroded component or substrate. 

A range of corrosion prevention uses and applications 

SuperCORR A is designed to protect and lubricate connectors, terminations and electrical bonds and grounds, relays, fittings, circuit boards, computers, and all forms of avionics such as: controls, radios, transponders, RDF, VOR, DME, GPS, radars, storm scope, flight control computers from moisture, general and fretting corrosion, surface static electricity, corona, and other electro migration problems. Other areas of application include Passenger Master Control Panels, fuel shut-off valves LRUs - flap jack screws, flap tracks, actuators, hydraulic line B-nuts, fuel bladder rails, interior and exterior light sockets, antenna interfacing and any exposed metal surfaces. Use anywhere dissimilar metals may come in contact. 

Eliminates electrical resistance failures caused by general and fretting corrosion and to lubricate connectors, nano, micro, and conventional electrical switches, terminal blocks and Busbars, electrical bonds and grounds, relays and switching systems, multi-pin cable connectors, interior and exterior light sockets, plugs, connectors, jacks, and receptacles, as well as electronic printed circuits and microminiature circuits. 

The corrosion inhibitor will also protect electrical motors, electronics and switches against surface static electricity, corona, and other electro migration problems and uses a fast evaporating nontoxic and environmentally acceptable carrier fluid that is non-reactive to most plastics. Approved in US Tri-service corrosion manuals and military, civilian and aircraft manufacturers, railway, and transport operators worldwide. 

POPULAR APPLICATIONS: 

Electronic circuitry, connectors and components, computers, electrical motors, relays and terminals ; Avionics - controls, radio, transponder, RDF, VOR, DME, GPS, radar, storm scope, flight control computer, light sockets and antenna interfacing; storage batteries; Passenger Master Control Panel, fuel shut-off valves - LRUs, flap jack screws, flap tracks, actuators, hydraulic line B-nuts, fuel bladder rails, and any exposed metal surfaces. 

Corrosion protection for a range of industries 

SuperCORR A IS USED BY THE MILITARY, MANUFACTURING AND SERVICE INDUSTRIES: Army, navy and air force, electronic component manufacturers, computer repair companies, meter and instrumentation manufacturers, aircraft manufacture and repair facilities, naval construction and repair facilities, electrical motors and fixtures, electronic sign manufacturing and maintenance companies, and many others. 

INDUSTRY APPROVAL FROM: NASA, Boeing Aircraft, Bombardier, Embraer, Lear, Gulfstream, Hawker-Beechcraft, Cessna, Raytheon, Polish Air Force, Northrop-Grumman, Royal Navy and Royal Norwegian Air Force.

Product Datasheet

Shipping Policy

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

Shipping Time -- Most orders received before 3:00PM Central Time will ship the same day, provided the product ordered is in stock. Most orders received after 3:00 PM will ship the next business day. Orders are not processed or shipped on Saturday, Sunday or major US holidays.

We cannot guarantee when an order will arrive. Consider any shipping or transit time offered to you by the carrier as an estimate. We encourage you to order in a timely fashion to avoid delays caused by shipping or product availability.

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

You have successfully subscribed!
This email has been registered